FOR MORE ECO-FRIENDLINESS, SHEAR SAVER NOW COMES WITHOUT A CARDBOARD BOX PACKAGING. IT NOW COMES PACKED IN A REUSABLE BLACK POUCH.
Shear Saver® is a lightweight, hand-held system that refines the cutting edge on shears up to 10” in seconds. It gently realigns, sharpens, and smooths the shear’s microscopic edge – without grinding away or removing metal from the cutting edge, and without negating the shear’s manufacture warranty.
Shears are your most valuable, and important, tool — and they deserve to be treated with exceptional care.
That’s why Razor Edge Systems, which has served as the nation’s leading authority on sharp edges for the past 60 years, developed Shear Saver®. This innovative tool utilizes cutting-edge technology to protect your shear’s edge, extend its edge-life, and bring back dull shears to like-new sharpness in seconds. Shear Saver® is the only personal edge refining device on the market made especially for hairstylists and barbers, and it helps you cut with precision and less effort with every cut.
Made right here in the USA, Shear Saver® is proud to say they're entirely safe for shears. And with a 100% satisfaction guarantee and lifetime warranty, it has the potential to become the second-most important tool in your toolkit — second to your shears, of course!
This edge refining tool has a lot of benefits, including that it:
- Drastically Extends Time Between Professional Sharpening
- Allows Shear Tune-Ups Right at Your Workstation
- Reduces Professional Sharpening Fees
- Gives Stylists Control of their Shears
- Is Safe for All Shears
- Is Easy to Use
- Sharp Shears Save Stylists Time Through Faster, Easier Cuts
- Saves Money Through Reduced Sharpening Fees
- Minimizes Hand Fatigue
Directions:
We are proud to say Shear Saver® is safe for shears, easy to use and only takes seconds.
Simply open your shears, straddle the Shear Guide, close your shears along the steel rod, and lastly, with shears closed, pull back from steel rod. Open. Straddle. Close. Pull. It’s easy as that!
Just repeat two to three times as needed. It’s that easy!
Watch the Shear Saver in action and learn more via the video links below:
https://vimeo.com/561920635/04f7182bdb
https://vimeo.com/592249123/d1a2411014
WHAT YOU NEED TO KNOW ABOUT SHEAR SAVER®
Q: Does Shear Saver® remove metal or change the angle of my shears?
A: When used correctly, per instructions, Shear Saver® does not remove metal from the cutting edge nor does it change the angle of the shear blades. It works by smoothing and microscopically realigning the cutting edge.
Q: Will Shear Saver® void my manufacturer warranty?
A: Because Shear Saver® does not remove metal or change the shear’s blade angles, it will not void the shear’s manufacturer’s warranty.
Q: How often should Shear Saver® be used?
A: To keep your shears at peak performance, Shear Saver® can be used after each client’s haircut if desired, with just a few passes on our tool. We recommend not waiting until your shears are dull before use.
Q: Can Shear Saver® be used too much?
A: No. Shear Saver® is designed to be used as often as you’d like. Since no damage is happening to the blade while using the tool, it can be used frequently.
Q: What if the product’s shear guide bends?
A: If Shear Saver® is accidently dropped and the shear guide bends, it’s critical to replace the guide before using it again.
Q: How do I clean it?
A: Shear Saver® does not require cleaning and should not be soaked in sanitizing solutions. If desired, the steeling rod can be wiped down with rubbing alcohol applied to a cotton ball, followed by a light shear or clipper oil applied with a cotton ball.
